High Speed Air Metal Saw

Cyber Monday High Speed Air Metal Saw 2011 Deals

Nov 30, 2011 11:26:17

Cyber Monday High Speed Air Metal Saw Deals
Click for larger image and other views

High Speed Air Metal Saw

>> Click here to update Cyber Monday prices for High Speed Air Metal Saw <<

Cyber Monday High Speed Air Metal Saw Feature

  • Cuts rods, pipes and bars with speed and efficiency
  • Zip through sheet metal as thick as 16 gauge
  • Lightweight-weighs less than two pounds
  • Rugged die cast aluminum body with rubber grip


Cyber Monday High Speed Air Metal Saw Overview

Cut a wide range of materials, trim and shape light plate, sheet metal and plastics.?Zip through sheet metal as thick as 16 gauge?Air consumption: 3 CFM @ 90 PSI?Cuts rods, pipes and bars with speed and efficiency?9000 strokes per minute?Lightweight - weighs less than two pounds?Rugged die cast aluminum body with rubber grip?Replacing item# 113Blades sold separately.Air inlet: 1/4" NPT Length: 9-1/4" Length of stroke: 3/8"



SAVE NOW on Cyber Monday offers below!

Available In Stock.

This Cyber Monday High Speed Air Metal Saw ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

High Speed Air Metal Saw

Limited Offer Today!! High Speed Air Metal Saw Cyber Monday and Black Friday 2011 Deals

Whey Supplement Vitamins Nutritional Supplements

Types of Ladders and Their Uses

From step stools to 50' scaffolding human beings have been extending their reach to greater and greater heights through the use of ladders. These nifty gadgets come in aluminum, wooden, metal and even plastic and are used for a variety of purposes. Different types are needed for reaching high shelves, accessing attic or loft spaces, climbing onto a roof, scrolling along a ceiling to floor bookcase or building the top floor of a 20 story high-rise. The price of this tool ranges from cheap household to expensive industrial models.

Metal Saw

Rolling ladders tend to work best when perusing a room filled library with ceiling to floor shelves. They attach to the top shelf (like a library roll) along a track and allow avid readers to access books on the top shelves of their extensive libraries. Want to utilize attic or loft space but don't want the steps constantly in the way? Install a Televator or telescope device that folds up into free space in the attic and pull down only when needed.  An extension model is needed to expand the length of reach on smaller models. Aluminum scaffolding for taller buildings require aluminum scaffolding planks for the builders to stand on and reach their work.

Metal Saw

Safety factors are always a concern but even more so when using cheap or used steps. First of all choose the right type of ladder for intended purpose. There are three basic types of ladders; industrial or heavy-duty with a 250 pound capacity, commercial medium duty for loads up to 225 lbs. and household light duty with a 200 lb. load capacity. When using a ladder following basic safety rules. Place it on an even, straight surface and ensure it extends at least 3 feet beyond the destination surface. Make sure it's steady when both climbing up or down and keep both feet on the rungs. Never leave a ladder unattended! The last important item for ladder safety is maintenance. Inspect wood ones for cracks, splintering or rotting. Look for broken or immovable joints on extension types and broken welds or cracks on aluminum ones.

Ladders are everywhere around us including descending into pools and off fire escapes. With proper maintenance and use these handy tools can expand the ability to reach places otherwise inaccessible.

Types of Ladders and Their Uses
Metal Saw

Bose Speakers 321 Cooking Utensils Protein Products

Air Hammer - The Power of Air Tapping Hammer Effect and Doing Wonders!

Air hammers are a great piece of invention. They have made the work of craftsmen very easy and simple. The craftsmen can now easily shape a piece of metal in minutes, with the help of the air hammer, which otherwise would have taken hours or days and also lot of physical strain and labour. The air hammers puts pressure to the tune of several dozens PSI (pounds per square inch) on a metal piece and thus the work that should take days, if done by hand, takes only a few minutes when done by the hammer.

Metal Saw

The air hammers can be either hand held or stationary. The hand held hammers are connected to an air tank with the help of a tube, from where pressurised air reaches the head of the hammer. These hand held hammers are generally used in households or in small factories or motor repairing shops.

Metal Saw

The stationary air hammers are of much bigger size and are more powerful than the hand held ones. They are used for bulk and heavy duty work. These stationary air hammers are generally used in factories where vehicles or other machineries are manufactured in bulk.

The air hammers have different heads for different activities. For shaping or smoothing work, a hammer head is used. For scoring or cutting work, a chisel head is used. These hammers are both useful as well as dangerous tools. So, extreme precaution must always be maintained, while using these hammers, by the operator.

The pressure in the air hammer also varies depending up on the work it being used for and the type of target metal it is working on. For simple smoothing jobs, generally low pressure is used. When work is being done on soft metals like aluminium and copper, then also low pressure is used. When work is done on more hard metals, like stainless steel or iron, much more pressure is needed and high-pressure is exerted through suitable air hammer. For shaping jobs also, high pressure is needed.

Air Hammer - The Power of Air Tapping Hammer Effect and Doing Wonders!
Metal Saw

Black Friday Reciprocating Air Cut-off and Sheet Metal Body Saw 2011 Deals

Nov 28, 2011 14:46:34

Black Friday Reciprocating Air Cut-off and Sheet Metal Body Saw Deals
Click for larger image and other views

Reciprocating Air Cut-off and Sheet Metal Body Saw

>> Click here to update Black Friday prices for Reciprocating Air Cut-off and Sheet Metal Body Saw <<

Black Friday Reciprocating Air Cut-off and Sheet Metal Body Saw Feature

  • Heavy Duty Steel Construction
  • Air consumption: 6 CFM
  • 10, 000 Strokes per min.


Black Friday Reciprocating Air Cut-off and Sheet Metal Body Saw Overview

Our high quality Air Body Saw is a must for anyone who needs to cut or fabricate sheet metal, rods, pipe or bars with speed and efficiency, Heavy duty steel body, Cuts a wide variety of material including sheet metal, metal plate and plastic, 10,000 Strokes per min. Stroke length: 3/8", Required pressure: 90PSI, Air consumption: 6 CFM, Air inlet: 1/4" NPT, Overall length: 9 1/4"



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Reciprocating Air Cut-off and Sheet Metal Body Saw ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Reciprocating Air Cut-off and Sheet Metal Body Saw

Limited Offer Today!! Reciprocating Air Cut-off and Sheet Metal Body Saw Black Friday and Cyber Monday 2011 Deals

Lcd Projector 2000 Lumens Kitchen Knife

Antique Fire Grates - More Than Just Wood Holders

To be sure, there are simple antique fire grates, but even those are far more than a grid of iron bars on legs. To understand why, you also have to understand that the function of the grate was more than just keeping the fire off the floor and allowing air to circulate. The fire grate also served the purpose of heat circulation, and of directing smoke up the flue. In some cases, it had to be made to fit an enormous opening, left over from a time when fireplaces had inglenooks and fender benches for sitting inside and keeping warm. Antique fire grates took their shape as much from their function as from the personal style of their owners.

Metal Saw

As coal replaced wood, the types of antique fire grates changed. The earliest fire grates meant to be used with coal were simple metal baskets with openings in the floor to allow air to circulate. Generally known as dog grates, they are among the most popular antique fire grates today. The front legs (or 'dogs') became decorative accents with fanciful castings and carvings. The center basket supported the logs - and eventually was replaced by floors with smaller openings so that they could be used with mixed fuel - coal and/or wood.

Metal Saw

As the use of coal became more prevalent, antique fire grates acquired fire backs. Made of metal or fire clay tiles, the job of the fire back was to absorb and reflect heat back into the room rather than letting it spill up the flue and out into the cold outdoors. Artisans and crafters shaped and designed fire backs and grates that were decorative as well as useful. The design of the grates also changed, from the free standing dog grates to hob grates, which supported a coal basket between two metal hobs. The hobs might have been flat metal plates which could be used to heat kettles and saucepans, but as time went on, many manufacturers built elaborate hobs that held heat well enough to cook on or inside.

The 19th century saw the introduction of register grates, with controls to regulate the flow of air to the fire and the heat from the fire. Register grates are among the most ornate and beautiful of antique fire grates. Many are built as full fireplace inserts, and include hobs for cooking on, heating boxes for warming food and heat registers which can be opened and closed to increase the flow of heat into the room, as well as soot boxes that open from the front for easy cleaning. Fenders were commonly built into the register grates, and many were beautifully detailed with tiled cheeks that served the dual purpose of reflecting heat back into the room and adding a decorative touch to a utilitarian appliance.

If you are renovating a period building, keep in mind that many antique fire grates remained in use long after their 'period', much as many of today's 'modern' homes don't have the most up-to-date appliances. You don't need to limit your choices strictly to the most 'appropriate' appliances if your tastes dictate otherwise.

Antique Fire Grates - More Than Just Wood Holders
Metal Saw

Black Friday Reciprocating Air Cut-off and Sheet Metal Body Saw 2011 Deals

Nov 27, 2011 16:33:05

Black Friday Reciprocating Air Cut-off and Sheet Metal Body Saw Deals
Click for larger image and other views

Reciprocating Air Cut-off and Sheet Metal Body Saw

>> Click here to update Black Friday prices for Reciprocating Air Cut-off and Sheet Metal Body Saw <<

Black Friday Reciprocating Air Cut-off and Sheet Metal Body Saw Feature

  • Heavy Duty Steel Construction
  • Air consumption: 6 CFM
  • 10, 000 Strokes per min.


Black Friday Reciprocating Air Cut-off and Sheet Metal Body Saw Overview

Our high quality Air Body Saw is a must for anyone who needs to cut or fabricate sheet metal, rods, pipe or bars with speed and efficiency, Heavy duty steel body, Cuts a wide variety of material including sheet metal, metal plate and plastic, 10,000 Strokes per min. Stroke length: 3/8", Required pressure: 90PSI, Air consumption: 6 CFM, Air inlet: 1/4" NPT, Overall length: 9 1/4"



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Reciprocating Air Cut-off and Sheet Metal Body Saw ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Reciprocating Air Cut-off and Sheet Metal Body Saw

Limited Offer Today!! Reciprocating Air Cut-off and Sheet Metal Body Saw Black Friday and Cyber Monday 2011 Deals

Led Lcd Samsung Electronic Organizers

Milwaukee 2682-20 M18 5-3/8-Inch Metal Saw, Tool only

Black Friday Milwaukee 2682-20 M18 5-3/8-Inch Metal Saw, Tool only 2011 Deals

Nov 26, 2011 17:54:10

Black Friday Milwaukee 2682-20 M18 5-3/8-Inch Metal Saw, Tool only Deals
Click for larger image and other views

Milwaukee 2682-20 M18 5-3/8-Inch Metal Saw, Tool only

>> Click here to update Black Friday prices for Milwaukee 2682-20 M18 5-3/8-Inch Metal Saw, Tool only <<

Black Friday Milwaukee 2682-20 M18 5-3/8-Inch Metal Saw, Tool only Feature

  • Compact, Low-Profile Design For easy handling and increased control
  • Exclusive 4-Pole Frameless Motor Delivers 3600 RPM for up to 20 percent faster metal cutting
  • Extra Large Cut Guide, Impact-Resistant Window and LED Light Improves line of sight for more accurate cuts
  • Lightweight Design, 5.8 lbs For easier overhead cuts and less user fatigue
  • Tool-Free Depth Adjustment Quickly and easily adjust cutting depth from 1/8-Inch - 2-Inch


Black Friday Milwaukee 2682-20 M18 5-3/8-Inch Metal Saw, Tool only Overview

Includes 18V Cordless M18 Lithium-Ion 5-3/8-in Metal Saw (Tool Only) - 2682-20, Tool Only - Battery and Charger Sold Separately, 30T Metal Tech Carbide-Tipped Blade, Blade Wrench



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Milwaukee 2682-20 M18 5-3/8-Inch Metal Saw, Tool only ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Milwaukee 2682-20 M18 5-3/8-Inch Metal Saw, Tool only

Limited Offer Today!! Milwaukee 2682-20 M18 5-3/8-Inch Metal Saw, Tool only Black Friday and Cyber Monday 2011 Deals

Damiana Leaf Logitech Touch

Different Kinds of Metal Cutting Hand Saws

Hand saws are primarily used for cutting metal whether it is a soft metal or is a thin sheet. These hand tools are majorly used by jewelers, roofers and plumbers for various cutting purposes. However, if you are going to work on a specific metal cutting project, then it is very important to select the correct tool among various metal cutting hand saws in order to ensure maximum possible positive results.

Metal Saw

Hacksaw

Metal Saw

A hacksaw comes with a blade and primarily used for cutting metal pipe or sheet metal. As far as the structure of this hand tool is concerned, it comes with an open frame and includes pins that are located at either end of the frame securing a thin, strip-like blade. Users can easily replace the blades when they get blunt. A pipe is cut when long, steady strokes are executed with sawing back and forth. They also come with machine oil that helps add lubrication in order to eliminate vibration.

Tri-fold Saw

A tri-fold saw is a fine compact folding saw that primarily serves the purpose of cutting fine metal using standard reciprocating saw blades. When you take an initiative for cutting wood, plaster or PVC, the metal blade gets switched out with other several types of blades. Like pocketknife, one can fold the blade of this saw. One can employ the blade in a straight position. One can also set the blade at an angle that is ideal for cutting something in a hard-to-reach place.

Jeweler's Saw

A jeweler's saw resembles the hacksaw in configuration. However, these hand saws are especially designed for cutting softer metals like copper. It is quite easy to adjust the length of jeweler's saw. It helps the users when they insert snapped blades or have to control the stroke length.

Different Kinds of Metal Cutting Hand Saws
Metal Saw

Black Friday Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery) 2011 Deals

Nov 25, 2011 14:32:16

Black Friday Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery) Deals
Click for larger image and other views

Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery)

>> Click here to update Black Friday prices for Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery) <<

Black Friday Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery) Feature

  • Cuts all types of metals such as uni-strut, galvanized pipe and metal studs
  • 3,200 RPM and 2-1/8-inch maximum depth of cut
  • Clear guard provides an excellent line of sight for cutting
  • Rugged construction for long, trouble-free operation
  • Limited warranty


Black Friday Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery) Overview

Tool includes: 6 7/8" blade. However 6 1/2" blade also work fine with this circular saw. Metal Cutting Saw, 6320-20, cuts all types of metals such as uni-strut, galvanized pipe, metal studs and black pipe, as well as Hardi-Plank and Durock materials. The saw uses a standard 5/8 in. arbor and has a 2-1/8 in. maximum depth of cut. The blade spins at 3,200 RPM and has an electric brake for quick, repetitive cutting. The clear guard provides an excellent line of sight for cutting and the rugged construction provides long, trouble-free operation.

Black Friday Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery) Specifications

Metal’s no challenge for this little Milwaukee brute, slicing quickly through everything we put it to: unhardened ferrous metal, non-ferrous metal, plastics and cement board. Power is plentiful, with an 18-volt battery juicing the blade’s 3,200 rpm. We were surprised at how quickly the electric brake halts the blade, too: In our very unscientific test, it was about a second and a half, great for repetitive cuts and even more important for safety. The blade guard is clear, and you do get a great sightline because of it, but it is plastic, and we didn’t want to take our chances slamming it around the warehouse to see what kind of impact it would withstand. A little care is a small price for a much-improved view, we think. It’s lighter than we expected by the rugged look of it, so it handles beautifully, and the ergonomic D-handle grip feels great. If you’re in plumbing, construction, maintenance or even fire and rescue, you ought to have this saw.--Kris Jensen-Van Heste

SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery)

Limited Offer Today!! Bare-Tool Milwaukee 6320-20 18-Volt Ni-Cad 6-1/2-Inch Cordless Metal Cutting Circular Saw (Tool Only, No Battery) Black Friday and Cyber Monday 2011 Deals

Cordless Headset Phone

Advantages of CNC Lathe Machines

CNC lathe devices are being used extensively in most of the industries. With the dawn of industrial era, the lathe machines played a vital role in determining the industrial production. These devices were fine tuned in its design and working style. The modern development in technological sciences has resulted in the birth of CNC devices which are determined to maximize the industrial production in a shorter span of time. These devices offer great level of accuracy in various applications such as milling, drilling, and cutting. With the advent of IT industry, the software applications are integrated with these tools to give a new face to the manufacturing sector. It greatly reduces the probability of humans getting injured in the age old mechanical devices.

Metal Saw

There are many numbers of small and medium sized business owners who are operating their businesses with 2 or 3 CNC lathe machines to craft their products. Larger devices are usually used in the production line to manufacture various parts in large number of quantities. Take an example of car production unit which might require different physical quantities in large numbers. Mechanical lathe devices cannot be used as they will take a long time. However, the modern day CNC machines take less time and yield better productivity with no human intervention. The advent of new technologies has paved way for the modern day CNC devices which are capable of converting any imaginary thoughts to real shapes. These tools come in various sizes, and price ranges depending upon the application.

Metal Saw

Advantages of CNC Lathe Machines
Metal Saw

Vizio 1080P 37 Calphalon Knives Baby Trend Double Stroller

How Woodworking Jigs Can Improve Safety and Precision of Your DIY Project

Woodworking jigs are a necessary part of any woodworking shop. They are great for repetitive tasks in many wood working projects. They make complex projects easier to manage and faster. You can purchase pre made jigs or make your own. Although they are inexpensive, making your own from scrap wood is even cheaper. Depending on the type of projects you like to do, you will need a variety of different jigs.

Metal Saw

Types of Jigs

Metal Saw

Dovetail jigs are great for making dovetail joints accurately. These can be purchased relatively inexpensively. Another option is to make your own dovetail jig. You can find templates for making your own jigs on the internet or in most stores that sell wood working supplies. Many of these templates allow you to make up to twelve different size jigs.

You may want to puck up a dovetail bit for your router and a dovetail saw. These are great tools if you intend to make your own jigs. Templates allow you to make variable spaced or fixed dovetails for a variety of projects, including cabinets, drawers and small boxes. Some systems come with bits and templates together in one kit. These save money compared to purchasing the components separately.

Dovetail saws are used to cut not only dovetails, but other fine joints for projects. The blades on these saws are thinker than other saws. This allows for greater accuracy. It's important to purchase a good quality tool for making tight joints and professional looking projects. Look for about fourteen to seventeen points per inch in a good quality saw.

A dowel jig is used for making quality, consistent dowels. If you are using a thick timber, get a self centering jig for better accuracy. There are a variety of sizes from a quarter to one half inch. Complete kits are available that include the dowel jig with several hundred dowels in a variety of sizes. Glue is sometimes included in these kits.

A kreg jig is great for cabinet making. Perfectly positioned slides are necessary if the movement in the drawer is to be smooth. Using kreg jigs save time because you won't need to measure and mark the spaces for drawer slides. These make it easier to mount metal drawer slides. They can be used for center, bottom or extension mounted drawers. This is an inexpensive, yet versatile piece of equipment.

Making a good jig yourself

Making your own woodworking jigs saves money in supplies. Use inexpensive materials and scrap pieces of plywood for making your own jig. Since you use the jigs for one project only, you don't want to spend much on materials. If you plan to re use your jigs, use a stronger hardwood to make them.

You can find instructions for making your own jigs in woodworking books or magazines. Instructions are also available on the internet. You can print these out for future reference. Consider getting a good binder to keep your jig making instructions organized in your workshop. Using plastic page covers will protect the instructions from getting dirty, ripped or damaged.

How Woodworking Jigs Can Improve Safety and Precision of Your DIY Project
Metal Saw

Optoma Multimedia Projector Lcd Televisions Hdtv Projector Lamp Life

Modern Jewelry Design

1950's- The invention and explosion of the Atomic bomb influenced this period with designs of starbursts and sprays of diamonds. Jewelry was classified into day (gold with no adorning stones) and night (diamonds) wear. Florentine finishes, twisted rope, mesh, piercing, fluting, foxtail chain and braided wire became popular textures for gold jewelry. Cultured strings of pearls became fashionable for daywear and turquoise, coral and amethyst were the in vogue colors and gemstones for the period.

Metal Saw

1960's- Few restrictions in the groovy 60s brought a hybrid of gold, platinum, silver, natural gemstones and geode crystals. Faceted gems and round brilliant cut diamonds along with organic, abstract and jagged shapes dominated metalwork.

Metal Saw

1970's- In this feminist era, women saw fit to purchase their own jewelry and define their own style. New and different materials were used such as wood, ivory, rock crystal and coral were incorporated into jewelry design. The 50s austerity of diamond daywear and nightwear was abolished and diamonds again saw the light of day. Other prominent stones were onyx, lapis lazuli and coral and other non-precious materials. Theme bracelets or charm bracelets are introduced, with add-on attributes and purchased separately.

1980-1990's- The affluent 80s brought a demand for sparkle, glamour and glitzy "Dynasty" and "Dallas" type of ornamentation. This was countered by the elegant Princess Diana's marriage which saw refined taste and grace reemerging. Like most fashion of the 90s, jewelry design was produced in many retro forms, a collection of times past. Aquamarine, tanzanite, colored pearls and silver were incorporated into sophisticated or chunky styles. Many teenagers began wearing multiple earrings in both or either ears, and Punk Rock influence was seen with the advent of safety pins and other household items being used as jewelry. Body piercing came into vogue, drawing unknowingly to most wearers from African origin. Bangle bracelets of rubber were popularized by Madonna and other pop icons as the global fascination with fame and superstars began to trump obsession with royalty.

2000- present day- Hybridizing metals and non-precious materials became fashionable with new techniques and designers collaborating colored diamonds or pearls with rubber, stainless steel and even plastic. Precious Metal Clay (PMC) is employed along with synthetic gemstones for unique, new designs.

Traditional gold wedding bands have been replaced by the platinum wedding band as the ring of choice for matrimonial wear. Sea glass has become a popular material in jewelry design. Tough resins of adaptable, colorful and waterproof materials are increasingly used as technology makes them available. The anklet has become a popular choice for adornment and is seen everywhere around the world. Black pearls have become highly desirable in jewelry pieces and Kokichi Mikimoto is the leading designer and harvester of these gems. The rolex watch is also a status symbol for the rich and famous. Depression-Era Bakelite has come full circle and is enjoying a Renaissance in modern jewelry wear with polka dot or multicolored bangle bracelets and pins of butterscotch and pea green colors. These pieces, although recycled from days gone by are not cheap and the value of these items is increasing. Hip-hop culture has infiltrated jewelry design and wearers with 'Bling-Bling' style of large, elaborate diamond and gold jewelry and pendants as a statement of affluence and status. The entire human history of jewelry making is known, excavated and documented, nothing is taboo and styles are recovered and fashion trends follow, making modern jewelry wear the choice of the consumer.

Modern Jewelry Design
Metal Saw

Black Friday DEWALT DW4856 6-Piece Metal/Woodcutting Reciprocating Saw Blade Set 2011 Deals

Nov 22, 2011 13:57:39

Black Friday DEWALT DW4856  6-Piece Metal/Woodcutting Reciprocating Saw Blade Set Deals
Click for larger image and other views

DEWALT DW4856  6-Piece Metal/Woodcutting Reciprocating Saw Blade Set

>> Click here to update Black Friday prices for DEWALT DW4856 6-Piece Metal/Woodcutting Reciprocating Saw Blade Set <<

Black Friday DEWALT DW4856 6-Piece Metal/Woodcutting Reciprocating Saw Blade Set Feature

  • Combination sets provide a selection of blades for common applications
  • Tough case expands to hold 9-inch blades and is designed to fit in power tool kit box for quick blade storage
  • Compatibility with all reciprocating saw brands
  • Ideal for use with metal, plastic, wood, and drywall
  • Set includes six reciprocating saw blades


Black Friday DEWALT DW4856 6-Piece Metal/Woodcutting Reciprocating Saw Blade Set Overview

Use the DEWALT DW4856 reciprocating saw blade set as the perfect addition to your cutting needs, featuring compatibility with all reciprocating saw brands. Intended for a broad range of applications including metal, plastic, wood, and drywall, these blades provide just what your job needs in handy 6 piece set. The set includes the DW4802, DW4806, DW4808, DW4811, DW4813, and DW4847 blades.



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday DEWALT DW4856 6-Piece Metal/Woodcutting Reciprocating Saw Blade Set ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

DEWALT DW4856  6-Piece Metal/Woodcutting Reciprocating Saw Blade Set

Limited Offer Today!! DEWALT DW4856 6-Piece Metal/Woodcutting Reciprocating Saw Blade Set Black Friday and Cyber Monday 2011 Deals

Sit And Stand Stroller

Short Guide to Understanding Heavy Metal Music

What is Heavy Metal?

Metal Saw

The definition of Heavy Metal can be both huge and ambiguous. There are so many different bands labeled in different metal sub-genera that are virtually impossible to follow them all. So, we can get to a point where we could ask: what heavy metal is. Is it loud guitars with distortion (just like rock n roll)?, pounding bass and drums (like dance music)?, a certain rhythm (different rhythms are used in different sub genera)?, an attitude?(we could argue that Madonna has the metal attitude). In general terms, Heavy Metal is a combination of everything we mentioned and more; therefore definitions should be left out of the equation. The word that best describes Heavy Metal is "lifestyle". A metal fan lives metal, and basically stays as a metal head for ever. The reason for this has been researched by science (just type heavy metal articles and you'll see), but for the metal fan definitions are not important (although we categorized bands by sub genera).

Metal Saw

How to learn about the genera?

The best way to understand what Heavy Metal is, should be to listen to good references. If you don't know anything about it and wish to start, read reviews (there are several web pages that can help you in this task). If you do know something about it, share it with other people and let them know what good examples of records and bands are available.

I suggest to start with late 60's, early 70's hard edgier music like the Doors and Hendrix, then work your way up in time with Black Sabbath, Led Zeppelin, Kiss, Rush, Pink Floyd and King Crimson. For the late 70's and early 80's the references are Punk rock bands like The Clash, The Ramones and The Sex Pistols, along with AC/DC and the New Wave of British Heavy Metal (Iron Maiden, Judas Priest, Saxon, Deff Leppard; etc.). In the Late 80's you should look for the Glam Metal movement (Mötley Crüe, Poison, Ratt, Bon Jovi , Guns n Roses and Dokken), and the Trash Metal scene with Slayer, Megadeth, Testament, Anthrax and Metallica music. The early 90's saw the Grunge movement surface with Nirvana, Pearl Jam, Soundgarden, Stone Temple Pilots, and Alice in Chains. Additionally the Alternative Hard Rock Music became mainstream in the early 90's with bands like Faith No More and Tool and underground the Power, Death and Black Metal scenes grew strong (specially in Europe) with bands like Helloween, Gamma Ray for Power Metal; Death, Cannibal Corpse for Death Metal; and Dimmu Borgir and Emperor for Black Metal.

The late 90's and 2000's has seen a mixture of many influences for the mainstreams movements like Nu Metal (Limp Bizkit, Korn, Marilyn Manson, Linkin Park, Disturbed), and Metal Core (Trivium, Mudvayne, Bullet for My Valentine).

As you can see there are many bands and many sub genera and is virtually impossible to mention everyone, therefore there are many opinions where each band should be categorized. The best advise if you wish to learn is to listen to the bands and make your own opinion about what is really Heavy Metal.

How to approach Heavy Metal?

Metal music is free, so should be you. An open mind is fundamental to start listening to it. You should not be analytic at first, just try to find what are your preferences (remember, there are a lot of sub genera). A very important fact is that you are not going to be able to listen to every band there is, try to get the better ones from many sub genera and start from there.

Where can I learn about the bands, genera, albums, etc.?

There are many web pages and documentaries about the subject. You just search for Heavy Metal music on the Internet and you should get all the information you need. There are also many magazines specialized in general music and/or metal music that you can look for.

Short Guide to Understanding Heavy Metal Music
Metal Saw

Black Friday DEWALT D28715 14-Inch Quick-Change Chop Saw 2011 Deals

Nov 21, 2011 14:00:15

Black Friday DEWALT D28715  14-Inch Quick-Change Chop Saw Deals
Click for larger image and other views

DEWALT D28715  14-Inch Quick-Change Chop Saw

>> Click here to update Black Friday prices for DEWALT D28715 14-Inch Quick-Change Chop Saw <<

Black Friday DEWALT D28715 14-Inch Quick-Change Chop Saw Feature

  • Powerful 15.0 Amp/5.5 hp (maximum motor hp) motor provides more overload capacity
  • Quick-Change blade change system lets users change wheels without a wrench
  • Patented Quick-Fence tool-free, 45 degree adjustable fence allows for fast and accurate angle cuts
  • Quick-Lock vise allows for fast clamping on different size materials
  • Soft start extends gear and motor life, ergonomically designed handle


Black Friday DEWALT D28715 14-Inch Quick-Change Chop Saw Overview

Quick, accurate crosscuts are easy to execute with the DEWALT 14-Inch Chop Saw featuring Quick-Change keyless wheel changes. The exclusive Quick-Lock Vise lets you secure materials fast, while the powerful 15 amp motor makes quick work of tough cuts. This saw also features convenient wheel changes and a portable, ergonomic design that's easy on your body, so you can work smarter for longer.

callout box top
14-Inch Chop Saw
with Quick-Change
At a Glance:
  • Powerful 15 amp motor delivers no-load speed of 4,000 rpm

  • Convenient Quick-Lock Vise for fast, precise clamping of materials

  • Versatile 45-degree pivoting fence for accurate angle cuts

  • Ergonomic D-handle design for control

  • Tool-free wheel changes with Quick-Change system

  • Three-year limited warranty, one-year free service, and 90-day money-back guarantee
callout box bottom
DEWALT 14-Inch Chop Saw

Featuring a heavy-duty 15 amp motor that delivers a no-load speed of 4,000 rpm.
View larger.

DEWALT 14-Inch Chop Saw

Cut rounds measuring 5 inches across and rectangular materials up to 4-1/2 by 6-1/2 inches. View larger.
Powerful, Easy-to-Handle Design for Versatility
Thanks to a 15 amp, 5.5-horsepower motor with overload protection and a no load speed of 4,000 rpm, this saw is powerful enough for tough applications. This DEWALT saw features a 14-inch wheel and can handle rounds that measure 5 inches across or rectangular materials as large as 4-1/2 by 6-1/2 inches. You can expect square, accurate cuts from this DEWALT saw.

This chop saw features an ergonomically designed D-shaped handle that allows you to position your hand comfortably, reducing user fatigue and increasing productivity and accuracy.

Convenient Features for Accurate Cuts
It's the details that make this DEWALT saw an impressive, versatile addition to your tool collection. The DEWALT Quick-Lock Vise allows you to clamp a wide variety of materials quickly and securely, allowing for faster transitions and increased efficiency.

When it comes time to do more than make 90-degree cuts, a 45-degree pivoting fence allows for fast, accurate angle cuts. The saw's steel base allows you to weld jigs or stops directly onto the base for a custom user experience that matches your most common applications.

In addition, the saw arm's compression spring provides smoother movement and increased durability compared to arm setups that use torsion springs. An adjustable spark guard allows you to direct sparks away from your work area, protecting both your body and work surfaces.

Quick, Tool-Free Wheel Changes and Easy Transport
When it comes time to replace the abrasive wheel, the Quick-Change blade change system allows you to change wheels without a wrench. So you never waste valuable time looking for the right wrench to complete the job.

At just 21 inches long and weighing 39 pounds, this chop saw is compact and portable. An integrated top handle makes it easy to carry the saw from your workshop to your vehicle or from your vehicle to the jobsite. For added convenience and safety, a heavy-duty lock-down pin allows the saw head to be locked in the carrying position without the use of a chain.

This 14-inch chop saw with Quick-Change comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
D28715 DEWALT 14-Inch Chop Saw, 14-inch abrasive wheel, fence wrench, and tool-free flange system.


DEWALT 14-Inch Chop Saw
The Quick-Change blade change system allows you to change wheels without a wrench.





SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday DEWALT D28715 14-Inch Quick-Change Chop Saw ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

DEWALT D28715  14-Inch Quick-Change Chop Saw

Limited Offer Today!! DEWALT D28715 14-Inch Quick-Change Chop Saw Black Friday and Cyber Monday 2011 Deals

Convection Microwave 7 Inch Car Monitor

Gold Price Forecast for 2011

Forecast: Rally to continue, but in a slower rate than 2010

Metal Saw

1.) A Quick Summary of 2010 the Price Trend

Metal Saw

1a.) Technical Summary:

2010 saw a continued rally in gold price which was up from USD1044.4 (1 Feb 2010) to USD1431.33 (6 Dec 2010), a 37% increase in 12 months. The trend stayed within the uptrend channel that started in 2001 when price's lowest price was USD253.5. Gold price has risen close USD1200 over the last 10 years, an increase of 565%, which has doubled in 2 years, from USD682 (Oct 2008).

2010 Q1 February gold price hit its lowest price, then the rally started until Dec 2010 when it reached new historical high at 1431.33. Q1 and Q3 were technical corrections seasons, and Q2 and Q4 were rally seasons.

2010 Seasonal Trends the Yellow Metal ( total rise of 37%):

Q1: highest price was 1136, lowest price was 1044 -correction season (down 8% from 1136)

Q2: new peak achieved at 1255.49 (21 June 2010) - a rally season - (up 11% from 1044)

Q3: July saw a correction; price was down to 1156 - correction - (down 8% from 1255.49)

August & Sept saw another rally - new peak at 1320.6 (27 Sept 2010) - (up 14% from 1156)

Q4: New historical peak achieved at 1431.33 (6 Dec 2010) - a rally season (up 24% from 1156)

1b.) Fundamentals Support for Gold Price's rally in 2010:

Increased in investment and physical demands were supporting gold price to rise over the whole of 2010. Commodities prices rose as a result of increasing demands mainly from emerging countries, and also caused by increasing speculative demands from the markets. Other commodities such as aluminum, palladium, also surged in 2010.

Physical demands came mainly from emerging countries such as India and China increased their yellow metal reserves as USD was trading at low levels. Indians and Chinese were also purchasing higher volumes of gold as an investment asset. China further opening up its Shanghai gold exchange in Q3 of 2010 further pushed up the price. While India's national spending on the yellow metal's purchases increased by over 90% in 2010 alone. Another big increase in buying came from Russia as physical demand was also up and national reserves in gold holdings also went up as a hedge against the falling US dollar. We also saw some other nations taking the same actions as USD was on a slide.

Increase in the world's largest Gold ETF fund; SPDR ETF's gold holdings were up to over 1300 tones from around 1100 tones at the start of 2010. International governments were also increasing their yellow metal's holdings as foreign reserves, hedging against the falling USD.

SPDR EFT Gold Trust up 28% in 2010.

Investment demand for the yellow metal was also strong as investors turned to this precious metal as an alternative investment against Euro and US dollars. Risk appetite for gold went up and pushed gold price to new peaks as Euro debts caused serious concerns to the markets. As Euro zone debts problems worsened; Spain, Ireland, Portugal, Greece went into severe troubles with their national debts, and saw their ratings downgraded. EU had to implement undesirable policies to rescue those countries. Euro against USD fell sharply from 1.500 (start of 2010) to 1.180 (June 2010), and recovered slightly to around 1.300 levels as debts problems were easing. The 'safe haven' factor as investors turned to gold during the Euro debts crisis, was a major leading factor behind the yellow metal price's strong rally during the 2nd half of 2010.

The other key factor was the weak US economy. US Fed's Quantitative Easing QE2 rescue policy in Q4 of 2010 gave gold price a final push above 1350, and hitting 1430 (historical peak). The easing of US monetary policy to boost the weak US economy, lead to another surge in investment demand for gold.

USD Index 1 year chart. As USD index was trading weak against other major currencies, markets once again turned to gold. High US unemployment rate at around 9.3%, slow retail sales and housing markets still in a slump, US interest rates stayed at low levels during 2010, and gold continued to rise as alternative investment demands increased. The yellow metal's saw a straight daily jump of USD20 each time when there was weak US economic data came out.

2.) 2011 Gold Price Trend Forecast

Do we think the rally will continue in 2011? The answer is "Yes". We expect the yellow metal's price will rise further, but at a slower rate than in 2010. We forecast gold price would increase by 15-25%, the price of gold could rise into the 1680 - 1900 area.

Do we think gold price is in a bubble? No, not at current price levels. And the trend was not always on a straight up since 2008. in 2009, and 2010, each time it achieved new peaks, there were healthy corrections of 5% - 10%. The price would be seen as a bubble if there was no corrections in the price's uptrend.

2a.) Technical Forecast For 2011 Gold Price Trend:

Looking back at our 2010 forecast, we predicted that the yellow metal would see rallies in Q2 and Q4, and Q1 and Q3 would see corrections. As it turned out, we were correct in the predictions of quarterly pattern.

2a.) 2011 Quarterly Technical Trend:

Q1: Technical corrections season - around 8 - 10% from peak price of 1431

Q2: Rally season

Q3: Correction followed by rally

Q4: Rally then corrections begin

A new historical peak could be reached in the area of 1680 - 1900.

Looking at the 10 year up trend chart. The yellow metal's price has been on a rising trend since 2001, when price of gold was at around USD250, and the uptrend became steeper started in 2007. As long as the price remains on the uptrend, the trend should continue to rise in 2011.

Looking at the Weekly Chart.

The yellow metal price went up from USD1044 (Feb 2010) to 1431.33 (Dec 2010).

The resistance line indicates that near term key resistance should be around 1550. While key horizontal resistance should be at 1387. That is, if gold price fell through 1387, then the uptrend could be collapsed.

As mentioned above, we forecast the trend to be rising through 2011, and could enter the 1680 - 1900 area.

Looking at the Quarterly Chart:

The yellow metal should enter a corrections season in Q1 of 2011, could see a 8% - 10% correction. It could go though another step-by-step rising trend, where Q1 and Q3 could see technical corrections, and Q2 and Q4 would see the yellow metal price on a rally.

2b). Fundamentals Factors affecting Gold Price Trend in 2011

The yellow metal's physical demands would continue to be on an increase as countries such as India and China's economies continue to grow. Domestic demands for gold would see increases. We expect China could further expand its gold exchange business as the investment demand from local Chinese has also been on a rise. And there's also Russia as a key buyer of gold to increase its gold holdings as foreign reserves. However, as China could further increase its interest rates to calm inflation and control growing housing prices, the 2011 GDP growth in China could see a slow down. Thus could cause a slower increase in physical demand for the yellow metal, in comparison with 2010.

While European debts problems would keep coming back into the picture, as the problem is still far from being completely resolved. Each time the Euro debts problem creeps into the picture, we could expect the risk appetite for the yellow metal to rise again. However, as Euro zone has also kept its key rates at low levels, the EU central banks could begin to lift rates during 2nd half of 2011, this could cause damages to its price.

After US implemented easing monetary policy, key economic data have shown better signs of US economic recovery. While the US trade deficit, unemployment still remain as weak areas of the overall recovery picture, US Fed's relaxed monetary policy should remain for at least during the 1st half of 2011. USD index should continue to be weak against other major currencies as US Fed intends to keep USD low for sometime to boost its exports. The yellow metal's price would remain strong as the US economic recovery process could still undergo some key obstacles. But, as positive signs of recovery could come into the picture during 2nd half of 2011, the price could see corrections as investors would turn to US stocks for immediate investments returns.

Inflation fear,would be a key factor in 2011 for a strong yellow metal price. The price could also be lifted as fear of inflation continue to rise. As emerging countries have forecast their domestic inflation to be rising as a result of higher than expected domestic growth, domestic prices could see further increase. European countries and US, if are viewed as on the road to recovery, inflation pressure could increase. This could give another support for the yellow metal's price to see more upwards momentum, as a hedge against inflationary pressure.

In Summary:

Looking at 2011 Gold Price Trend Chart: We forecast the price to continue to rise in 2011. As long as the demands are still up, prices should continue to rise in 2011. However, the rate of increase would not be as significant as in 2010. The trend could also be more volatile as the price had already gone up by over 30% in 2010, and has come up from USD682 (20 Oct 2008) to 1431 (6 Dec 2010) which is a 110% increase in 2 years. We expect a 15% - 25% increase in the yellow metal's price this year, in step-by-step uptrend, and if technicals hold, the price could see USD1680-USD1900 per troy ounce in 2011.

Gold Price Forecast for 2011
Metal Saw

Jig Saw Tool Video Projector 32 Led 120Hz

Milwaukee 48-39-0561 44-7/8-Inch,14/18 Teeth per Inch, Bi-Metal Band Saw Blades, 3-Pack

Black Friday Milwaukee 48-39-0561 44-7/8-Inch,14/18 Teeth per Inch, Bi-Metal Band Saw Blades, 3-Pack 2011 Deals

Nov 19, 2011 16:26:05

Black Friday Milwaukee 48-39-0561 44-7/8-Inch,14/18 Teeth per Inch, Bi-Metal Band Saw Blades, 3-Pack Deals
Click for larger image and other views

Milwaukee 48-39-0561 44-7/8-Inch,14/18 Teeth per Inch, Bi-Metal Band Saw Blades, 3-Pack

>> Click here to update Black Friday prices for Milwaukee 48-39-0561 44-7/8-Inch,14/18 Teeth per Inch, Bi-Metal Band Saw Blades, 3-Pack <<

Black Friday Milwaukee 48-39-0561 44-7/8-Inch,14/18 Teeth per Inch, Bi-Metal Band Saw Blades, 3-Pack Feature

  • 14/18 TPI, bi-metal construction (3-pack)
  • Matrix II high speed steel teeth with 8% cobalt
  • For cutting stock 5/32" to 5/16" thick
  • For use with portable band saws using 44-7/8" x 1/2" x .020" blades
  • Limited warranty


Black Friday Milwaukee 48-39-0561 44-7/8-Inch,14/18 Teeth per Inch, Bi-Metal Band Saw Blades, 3-Pack Overview

Includes 14/18T Band Saw Blade 3PK - 48-59-0561



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Milwaukee 48-39-0561 44-7/8-Inch,14/18 Teeth per Inch, Bi-Metal Band Saw Blades, 3-Pack ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Milwaukee 48-39-0561 44-7/8-Inch,14/18 Teeth per Inch, Bi-Metal Band Saw Blades, 3-Pack

Limited Offer Today!! Milwaukee 48-39-0561 44-7/8-Inch,14/18 Teeth per Inch, Bi-Metal Band Saw Blades, 3-Pack Black Friday and Cyber Monday 2011 Deals

Portable Hd Projector

Chainsaw Carving Tips

Safety should always be the first concern on any project. Proper safety equipment such a goggles, gloves and sturdy scaffolding are very important. The scaffolding should always be moved to the right height and position for safe carving. If your arms feel uncomfortable holding the saw to cut, adjust your scaffolding or you can be seriously injured. Never cut above the waist unless it is with a small electric saw and your arms are fully extended.

Metal Saw

Before making the first cut, draw out the main shape of your carving from the front view. Leave about a foot at the bottom for the base. Be sure your saw is as sharp as it can be. A sharp saw makes the job so much easier. A 16 to 24 inch blade will usually do most carvings. Make your wedge cuts by cutting a down angle first and then a straight or slightly upward angle to chunk it out. Once you have made all of your wedge cuts from your markings, it is time to mark the sides.

Metal Saw

You have to imagine the profile and be sure to not cut off too much especially from the head. When you have all the main chunks cut out, it is time to start carving with your saw. A 12 inch electric saw is great for shaping out the smaller chunks. Be careful not to cut too deep. You can do much of the final saw work by applying the blade lightly on the wood and raking it back and forth. This will take layers off.

If it is a human carving, you will need to finish it by sanding. You can use a palm sander for the large areas and a die grinder for the smaller areas. You can use the edge of the sanding disk to cut beards, hair or fur. On animal carvings, turn the saw slightly sideways and carve out fur lines with the tip. Some other handy tools to have are wood rasps and wood chisels.

When you have finished carving and sanding, it's time to coat your project with a mixture of half shellac and half mineral spirits. You can leave it natural or paint it. If you don't think you can carve a human or bear, try a mushroom. Above all, keep your mind on safety and have fun. You may be really surprised at what you can do!

Chainsaw Carving Tips
Metal Saw

Black Friday DEWALT DW7763 6-3/4-Inch Metal Cutting Saw Blade with 5/8-Inch Arbor 2011 Deals

Nov 18, 2011 17:21:45

Black Friday DEWALT DW7763 6-3/4-Inch Metal Cutting Saw Blade with 5/8-Inch Arbor Deals
Click for larger image and other views

DEWALT DW7763 6-3/4-Inch Metal Cutting Saw Blade with 5/8-Inch Arbor

>> Click here to update Black Friday prices for DEWALT DW7763 6-3/4-Inch Metal Cutting Saw Blade with 5/8-Inch Arbor <<

Black Friday DEWALT DW7763 6-3/4-Inch Metal Cutting Saw Blade with 5/8-Inch Arbor Feature

  • Specially formulated titanium carbide teeth for long life in metal cutting
  • Modified alternate top grind for clean, smooth cuts
  • Thin kerf for fast and smooth cutting action
  • High-backed shoulder for increased strength behind each tip
  • Includes one saw blade


Black Friday DEWALT DW7763 6-3/4-Inch Metal Cutting Saw Blade with 5/8-Inch Arbor Overview

The DEWALT DW7763 6-3/4-inch metal cutting saw blade handles the toughest jobs using its 40 titanium carbide teeth that are ultra-durable for longer life. The modified alternate top grind construction enables cleaner and smoother cuts over the life of the blade. The thin kerf design requires less energy to cut, and the high-backed shoulder increases the strength of each tip, maximizing speed and efficiency of this saw blade. The DW7763 uses a 5/8-inch arbor size.



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday DEWALT DW7763 6-3/4-Inch Metal Cutting Saw Blade with 5/8-Inch Arbor ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

DEWALT DW7763 6-3/4-Inch Metal Cutting Saw Blade with 5/8-Inch Arbor

Limited Offer Today!! DEWALT DW7763 6-3/4-Inch Metal Cutting Saw Blade with 5/8-Inch Arbor Black Friday and Cyber Monday 2011 Deals

Projector 720P Muscle Whey Protein