You have a beautiful laminate floor and you're wondering if you should finish the concrete stairs in laminate to give the space a cohesive, designer feel. First of all, is it possible? Can you cover concrete with laminate? The answer is yes. In fact, if you've ever covered wooden stairs, the process is similar, except that the nosing installation is a little trickier.
Metal Saw
What You'll Need
Metal Saw
To accomplish this task you'll need:
PL200 or stronger construction glue
Skill saw for cutting laminate
Chop saw for cutting metal nosings
drill with a concrete bit
electric screwdriver
plastic plugs
broom
I recommend using metal nosings as these are stronger, and will hold better on concrete stairs. (Laminate nosings that come in a kit are also trickier as the tracks need to be in exactly the right spot, and there isn't a lot of standardization--every manufacturer makes a slightly different size/style of laminate nosing).
What to Do
Start by sweeping the stairs and cleaning up any shavings or dust. You'll need a clean surface for the glue to adhere properly to the concrete and laminate. Once the area is clean, start with the risers first.
Measure, mark and cut each laminate plank to fit the riser with the groove side facing downwards. Glue the riser and the back of the plank, and secure the plank in place, again, making sure that the groove is at the bottom of the riser. Once all the risers are glued, you're ready to start on the nosings.
Begin by measuring and cutting the metal nosings to fit. Mark on the concrete where the screws will go, then using a drill with a concrete bit, drill the holes. Place a plastic plug in each hole. Number the nosings so that you match each one to the correct tread when you screwnail them in later.
Measure, mark and cut each laminate plank to fit the tread with the groove side facing inwards to meet the bottom of the riser. Arranging the planks so that the groove on the riser meets the groove on the tread makes for a clean, professional edge in the corner. Glue the tread and the back of the plank and secure the plank in place, making sure that groove faces inward.
Stair nosings are intended to finish the look by capping the lip of the stair. Unfortunately, with concrete stairs this can be a little tricky as the lip on the stairs is often thicker than the actual stair nosing. If this is the, cut a laminate plank so that it's wide enough to cover the the concrete lip, and glue it to the face of the lip on each tread. Then secure the nosing over top by screwnailing it through the laminate tread into the pre-drilled holes in the concrete. (If you've already covered the lip-face with laminate, you can glue the nosing to the laminate for extra adherance, and then screwnail the top of the nosing into place.)
Laminate Flooring How To - Covering Concrete Stairs With Laminate
Metal Saw
Click for larger image and other views
>> Click here to update Cheapest prices for Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating <<
Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature
- Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
- Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
- Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Overview
Freud D1080N 10" 80T Diablo Non-Ferrous & Plastic Table/Miter Saw Blade These thin kerf blades have a Triple Chip Grind (TCG) Tooth Design for long life and a clean, burr-free finish. Diabloâs unique anti-vibration design and precision-tensioned steel plate provide critical protection against vibration, allowing these blades to cut smoother and quieter.Freud D1080N 10" 80T Diablo Non-Ferrous & Plastic Table/Miter Saw Blade Features:; Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp; Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight; Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life; Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability; Laser cut arbor for accurate blade rotation reducing vibration and premature wear; Table saw/slide miter blade ; Great for non-ferrous/plastic work ; Super thin laser cut kerf ; Perms-SHIELD non-stick coating ; TiCo Hi-density Carbide blade ; 12,000 maximum RPM ; 5/8" arbor ; 80 teeth ; 10" blade diameter ; Carded
Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Specifications
For a high-impact blade that makes clean cuts in plastics and non-ferrous metals, look no further than the Freud D1080N Diablo 10-Inch Non-Ferrous Metals and Plastics Saw Blade. Thanks to its proprietary TCG (triple-chip grind) teeth, this is your go-to blade for slicing through plastic structures and non-ferrous metals such as copper pipes, aluminum extrusions, and brass plates.
 |
| Model # | D1080N | | Diameter | 10" | | Machine Use | Miter/Slide Miter Saw, Table Saw | | Application | Non-Ferrous Metals/Plastics | | Teeth | 80 TCG
(Triple-Chip Grind) | | Arbor | 5/8" | | Kerf | .094" | | Hook Angle | -5° |
|  |
|
Makes Clean, Razor-Sharp Cuts in Plastic and Non-Ferrous MetalsAchieving premium results when working with plastics and non-ferrous metals is all about clean, accurate cuts. The Freud D1080N makes this process easy, fast, and precise. Constructed for making flawless crosscuts, this blade's proprietary TCG (triple-chip grind) teeth leave a clean, burr-free finish.
Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for jobs that call for slicing through plastic structures and non-ferrous metal pipes, extrusions, and plates. Appropriate application materials include copper, aluminum, brass, and plastic.
Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1080N's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.094-inch kerf between the blade's 80 TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.
An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.
Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1080N is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.
Fits Miter and Table Saws
The Freud D1080N is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws and miter saws, including sliding miter saws.
This product is covered by Freud's Limited Lifetime Warranty.
What's in the Box
Freud D1080N Diablo 10-Inch Non-Ferrous Metals and Plastics Saw Blade.
SAVE NOW on the special offers below!
Available In Stock. |
| This Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating ships for FREE with Super Saver Shipping. |
|
Limited Offer Today!! Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal and Plastic Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Black Friday and Cyber Monday Deals
Logitech Trackman 3D Led Lcd Hdtv Lcd Projector Lamp
